TOTO MH/FAUCET
02/03
Installation notes:
Water pipes need to be thoroughly rinsed prior to installation. Be sure to mount and test
each faucet in line with the valid specications. We are not liable for any damages
caused by improper installation.
Specications:
Operating pressure range .................................................. 0,05 MPa min. / 1,0 MPa max.
Operating pressure range recommended ...................................................... 0,2-0,3 MPa
Test pressure ...........................................................................................................1,6 MPa
Hot water temperature ....................................................................................... 80°C max.
Hot water temperature recommended .......................................................................60°C
Flow rate at 0,3 MPa ................................................................................................. 4 l/min
If ow pressure exceeds 0,5 MPa, a pressure reducing valve must be installed.
We reserve the right to make structural changes.
Installationshinweise:
Wasserrohre müssen vor der Montage gründlich ausgespült werden. Jede Armatur ist
entsprechend der gültigen Normen zu montieren und zu prüfen. Für Schäden, die durch
unsachgemäße Installation verursacht wurden, übernehmen wir keine Garantie.
Technische Daten:
Betriebsdruckbereich .......................................................... min. 0,05 MPa / max. 1,0 MPa
Betriebsdruckbereich empfohlen .................................................................... 0,2-0,3 MPa
Prüfdruck .................................................................................................................1,6 MPa
Heißwassertemperatur ........................................................................................max. 80°C
Heißwassertemperatur empfohlen .............................................................................60°C
Durchussgeschwindigkeit bei 0,3 MPa .................................................................. 4 l/min
Wird der dynamische Druck von 0,5 MPa überschritten muss ein Druckminderventil
eingebaut werden.
Konstruktionsbedingete Änderungen bleiben vorbehalten.
Comments to this Manuals